Introduction
Ridata Compact Flash Card is a series of memory cards that adapt flash memory technology. Conforming to the Compact Flash Specification released by Compact Flash Association (CFA), Ridata CF cards can run in three basic modes: 1) PC Card I/O Mode, 2) PC Card Memory Mode (CF Mode), and 3) True IDE Mode (Fixed Mode).With this advantage, Ridata CF cards are especially applied to all kinds of portable devices with a CF slot, such as digital cameras, video cameras, pocket PCs, notebook PCs, industrial controllers, embedded systems, PMP and other multimedia devices.

Product Features

• High Speed access of Reading and Writing.
• Conforms to Compact Flash Association Standard.
• PC card Standard and PC card ATA compatible.
• True IDE Mode compatible.
• Host ATA disk I/O BIOS, DOS/ Windows file system, utilities, and application software compatible.
• Controller supports Ultra DMA Mode up to Mode 4.
• Supports CIS implemented with 256 bytes of attribute memory.
• Supports 8 or 16 bit host transfers with any host speed using IORDY.
• 3.3V/ 5V single power supply.
• Error Correction Code (ECC) embedded.
• Low power consumption with automatic power management.
• Non-volatile memory, no battery required.

Product Specification

• Physical Specifications: Type I Format: 36.4mm x 42.8 mm x 3.3 mm (L x W x T)
• Reliability: MTBF 5,000,000 power-on hours.
• ECC supports two random bits of a sector.
• Endurance: 100,000 times of program/ erase cycles.(max)
• Power Requirement: 3.3V/ 5V.
• Environment Requirements: Operating Temperature: 0°C to 70°C. Non-Operating: -20°C to 70°C. Relative Humidity: 95% (max)
• Available capacity: 4GB, 8GB, 16GB and 32GB.
• Speed up to 233x.

*Notes:
When using 2GB and above capacity CF Cards, please adapt devices which support FAT32 file system.